Tacoma

Vehicle Details

-Solid Axle Swap

-3" Wagoneer Springs in Front

-Freshly Rebuilt Dana 44 With High Steer 4.88's and Welded (4) 5150 Bilstein Shocks 14"

-63" Chevy's with Custom Made Double Shackles on 2" Block and Custom Track Bar with .25 Wall Bottom Tube

-Freshly Rebuilt Stock Axle with E Locker and 4.88's

-Intensive Frame Bracing

-Gas Tank was Moved Behind Cab Between Frame Rails

-2000 LB. Suspension Winch to Control Double Shackles

-1986 IFS Power Steering Box

-Power Steering Cooler with Custom Lines

-Bed Bobbed

-Shock Mounts, Cross Members and Shackles Made in House

-39.5" IROKS

-Crossemember is .375 plate, sheared and pressed broke to maximize clearance, cut out to cradle t-case, top mounted plates- so there are no bolts to get hung up on. Fully TIGed

-Front bumper is 1.75 .120 DOM welded to the frame and front crossmember.

-New front driveshaft is High Angle Driveline Taco Shaft with Toyota Joints, long travel slip and .188 wall tubing to help resist rock rash.

-TRD SuperCharger and Headers

Additional Details

Returning for Exo-Cage